How Pre-Treatment Tank (Pickling Plants) Can Be Used In Galvanizing Process?

Galvanizing is the process to coat the metal with the zinc, however, this process is not a 1-step process. Zinc Coating is metallurgically bonded to the metal surface and this principle works for the galvanizing.  The galvanizing plant manufacturer, supplier Ahmedabad India make the plant for all type of fabricated or non-fabricated products. All the steps for the galvanizing process can help to make the metal clean and coat with zinc.

All Galvanizing Process Consist of These Fundamental Steps:

1. Pre-Treatment – This step consists of process tank such as pickling plants for the cleaning and pickling operations that can help to free the surface. It can help to clean the surface of the metal from the dirt, rust, grease and scale.
2. Pre-Fluxing – This step helps to dissolve the oxide from the iron or steel surface after the cleaning and pickling process. This step can help to prevent further rust forming.
3. Galvanizing – The clean and oxide-free metal will be galvanized by molten zinc.
4. Finishing – This step is for quenching, removing excessive zinc and finishing the process.

Corrotech provides all type of the tanks regarding the galvanising process, considering the pre-treatment tanks they are modular as well as highly reliable. It is used for removing the dust and dirt from the surface so it is made with the premium quality material and robust structure as well.

This step consists the operations such as degreasing, pickling, rinsing, and for supporting this there are stand-alone tanks with their support structure. The process tanks are a comprehensive solution for the galvanising process.

A good manufacturer, exporter, Ahmedabad India make the whole plant with the pre-treatment tanks. The pickling plants– are fabricated with high-quality PP (Polypropylene) & FRP ( Fiber Resin Plastic).  The tanks are used for the specific purpose to remove the dirt, grease so it consists acid in it. So, these tanks should be made with the quality of mechanical resistance, fire resistance and shock resistance.

As this process tank is used to remove the mill scale, using the sulphuric or hydrochloric acid. This is the first step to put the material in the tank for the limited pickling period and then it can be processed for the galvanizing.

The Bottom Line,

This step is most important as it can help to remove the dirt and rust from the metal, clean it properly, pickle it and only after that you can proceed with the galvanizing process.